Electro-Voice XLCi Series, Руководство по монтажу

Страница: 26 / 32

ELECTRO-VOICE
®
X LC i TM Rigging Manual 25
4. Rigging Inspection and Precautions
Electro-Voice X
LC
i Loudspeaker Systems:
Prior to each use, inspect the loudspeaker enclosures for any cracks, deformations, missing or
damaged components that could reduce enclosure strength. Inspect the rigging plates on the
enclosures for any cracks, deformations, corrosion, missing or loose screws which could reduce
the flying hardware strength. Replace any loudspeaker systems that are damaged or missing
hardware. Never exceed the limitations or maximum recommended load for the X
LC
i systems.
Electro-Voice X
LC
i Front Rigging Connector Bar Assemblies: Prior to each use, inspect the
front rigging connector bars and the front rigging plates for any cracks, burrs, deformations,
corrosion or missing or damaged components that could reduce connector bar assembly strength.
Replace any connector bars that are damaged or missing hardware. Always double check that
each connector bar is securely bolted into position on the front rigging plates of the X
LC i
enclosures and grids before lifting. Never exceed the limitations or maximum recommended load
for the X
LC i rigging hardware.
Electro-Voice X
LC
i Rear Connector Bar Assemblies: Prior to each use, inspect the rear rigging
connector bars and rear rigging holes for any cracks, burrs, deformations, corrosion or missing or
damaged components that could reduce connector bar assembly strength. Replace any connector
bars that are damaged or missing hardware. Always double check that each connector bar is
securely bolted to the rear rigging holes. Never exceed the limitations or maximum recommended
load for the XLCi rigging hardware.
Pick-Up Grid Assemblies: Prior to each use, inspect the pick-up grid bar assembly any for
cracks, burrs, deformations, corrosion or missing or damaged components that could reduce the
pick-up assembly strength. Replace any pick-up grids that are damaged or missing hardware.
Always double check that each pick-up grid is securely bolted to the front connector bar
assemblies and the rear connector bar assemblies on the X
LC i enclosures before lifting. Never
exceed the limitations or maximum recommended load for the pick-up grids.