U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 8/2004
Part Number 38110-278 Rev. A
Architectural & Engineering Specs:
Dimension Drawings (Flying Version Shown):
Xi-1191A Part Numbers
•
1147-3422 - Black
•
1147-3425 - White
Xi-1191AF Part Numbers
•
1147-3419 - Black
•
1147-3426 - White
The loudspeaker system shall be a low frequency system with performance controlled by the processors listed in this engineering data
sheet. The loudspeaker system shall have a single 18-inch low-frequency woofer. The woofer shall have an 8-ohm, 4-inch-diameter
voice coil constructed of aluminum wire, which shall be capable of handling a 600-watt shaped pinknoise signal with a 6-dB crest factor
for 8 hours (as per ANSI/EIA RS-426A & AES 2-1984). The loudspeaker system shall have a sensitivity of 100 dB (1 watt at 1 meter). The
loudspeaker system shall have an enclosure constructed of 18-mm, 13-ply birch plywood and shall have a vinyl-clad steel grille. The
flying version shall employ flying hardware of a “track” style and two tracks on the enclosure top and two tracks on the enclosure bottom.
The loudspeaker dimensions shall be 914 mm (36.00 in.) high, by 586 mm (23.07 in.) wide and 759 mm (29.88 in.) deep and shall
weigh 68.2 kg (150 lbs).
The loudspeaker shall be the Electro-Voice
®
Xi-1191A or Xi-1191AF.
Impedance:
Frequency Response (Full & Half Space):
This Xi Loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified in the
X-Array Xi Install Flying Manual and possible manual update notices. This system should be suspended with certified rigging
hardware by an authorized rigging professional and in compliance with local, state, and federal overhead suspension ordinances.
CAUTION
Performance Match
• P3000 (RL)
• CPS 2.8
• Dx38
• P1200 (RL)
• CPS 2.11
Wiring/Connection Chart:
:
F
L
n
I
1
s
n
i
P
t
u
O
2
s
n
i
P
d
e
l
e
ll
a
r
a
P
4
&
3
s
n
i
P
s
r
o
t
c
e
n
n
o
C
n
e
e
w
t
e
B
