U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 5/2004
Part Number 38110-271 Rev. A
Architectural & Engineering Specs:
Dimension Drawings:
Xi-1122A/85F Part Numbers
•
1061-3429 - Black
•
1061-3432 - White
The loudspeaker system shall be a two-way bi-amp system. The system shall have an 12-inch, low-frequency loudspeaker with a
nominal impedance of 8 ohms and a 3-inch aluminum voice coil. The low-frequency loudspeaker shall be a 12-inch driver with a 2.5-
inch voice coil and a nominal impedance of 16 ohms. The low-frequency driver shall have a power-handling capacity of 300 watts for
8 hours (as per ANSI/EIA RS-426 A & AES 2-1984). The high-frequency section shall employ a compression driver capable of handling
150 watts, 1,760- to 20,000-Hz when pink noise of a 6-dB crest factor is applied for 2 hours (as per AES 2-1984 and ANSI S4.26-1984
standards). The loudspeaker shall be constructed of 18-mm, 13-ply birch and shall be trapezoidal in shape. The wedge angle shall be
30-degrees. The grille shall be constructed from 16 GA powder-coated steel backed by acoustically transparent fabric. The system
shall be capable of very-high level operation with a bandwidth of 50 to 16,000 Hz. The system dimensions shall be 379 mm (14.94
inches) wide by 584 mm (23.00 inches) high by 358 mm (14.08 inches) deep. The system shall employ flying hardware of a “track” style,
having two tracks on the enclosure top and two tracks on the enclosure bottom. The enclosure shall include a stand mount on the
bottom of the enclosure. Net weight shall be 59 lbs (26.8 kg).
The loudspeaker shall be the Electro-Voice
®
Xi-1122A/85F.
This Xi Loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified in the
X-Array Xi Install Flying Manual and possible manual update notices. This system should be suspended with certified rigging
hardware by an authorized rigging professional and in compliance with local, state, and federal overhead suspension ordinances.
CAUTION
Performance Match (Amplifiers)
• P3000 (RL)
• CPS 2.8
• P1200 (RL)
• CPS 2.11
