background image

Xw12 T

w

o

-W

a

y,

 F

u

ll-Range Floor Monitor

Xw12 Two-Way, Full-Range Floor Monitor

6

600 Cecil Street, Buchanan, MI 49107

616/695-6831, 616/695-1304 Fax

Specifications

Frequency Response (measured in far
field, calculated to one meter on axis,
swept sine wave, one watt into LF
section 2.83 V at 400 Hz, anechoic
environment; see Figure 2):

60-16,000 Hz

Crossover Frequency:

1,250 Hz

Efficiency, LF/HF:

4.8/25 %

Maximum Long-Term-Average Power-
Handling Capacity (per ANSI/EIA RS-
426A 1980), LF/HF:

300/75 watts

Maximum Long-Term-Average
Midband Acoustic Output, LF/HF:

14/18.8 acoustic watts

Sensitivity (SPL at one meter, indicated
input power, anechoic environment,
average level), LF/HF,

1/1 watt:

99.0/110.0 dB

300/75 watts:

124.0/129.0 dB

Beamwidth (angle included by 6-dB-
down points on polar responses,
indicated one-third-octave bands of pink
noise; see Figures 1 and 3),

Horizontal, 1,200-16,000 Hz:

80° (+25°, -20°)

Vertical, 1,200-16,000 Hz:

55° (+25°, -20°)

Directivity Factor, R

θ  

θ  

θ  

θ  

θ  

(Q), 1,200-16,000

Hz Average (see Figure 4):

14.3 (+9.8, -5.4)

Directivity Index, D

i

, 1,200-16,000 Hz

Average (see Figure 4):

11.6 dB (+2.3 dB, -2.1 dB)

Distortion  (115 dB SPL at one meter,
shaped spectrum; see Figure 5),

Second Harmonic,

100 Hz:

0.5 %

500 Hz:

0.8 %

2,000 Hz:

3.7 %

5,000 Hz:

1.7 %

Third Harmonic,

100 Hz:

3.3 %

500 Hz:

0.9 %

2,000 Hz:

0.3 %

5,000 Hz:

<0.1 %

Transducer Complement,

HF:

DH6 driver, HP-type 80°x 55° horn

LF:

DL-type 12-in. woofer

Impedance (see Figure 6),

Nominal, LF/HF:

8/16 ohms

Minimum, LF/HF:

8.2/10.5 ohms

Input Connections:

Two Neutrik NL4MPR Speakon

®

connectors paralleled on each side of
enclosure

Recommended Amplifier Power,

HF:

600 watts per channel @ 8 ohms

LF:

800 watts per channel @ 8 ohms

Enclosure Construction,

Enclosure Shell:

3/4-in., 12-ply curved birch plywood
18-mm, 13-ply flat birch plywood

Finish:

Black textured paint

Grille:

14-gauge perforated steel

Dimensions,

Height (front):

443.1 mm (17.44 in.)

Height (profile):

358.3 mm (14.11 in.)

Width:

584.2 mm (23.00 in.)

Depth (overall):

309.8 mm (12.20 in.)

Depth (profile):

408.8 mm (16.10 in.)

Angle:

110° wedge

Net Weight:

28.2 kg (62 lb)

Shipping Weight:

31.3 kg (69 lb)

Part Number 534226 Rev. B—9934

SPEAKERS—X-Array

TM

Figure 8—Dimensions

©Telex Communications, Inc., 1999 • Litho in U.S.A.

Содержание X-Array Xw12







Отзывы: