Adjusting the Loudspeaker Attachment Point (all Speakers)
Move the threaded shaft to the correct hole by pulling back on the handle and sliding the shaft in the steel frame.
The upper point is used for 12” Loudspeakers and the lower point is used for 15” Loudspeakers (see Figure 3).
*Note: For ZX Series loudspeakers, attach the HA-3 or HA-5 adaptor to the loudspeaker before proceeding.
Installing the HA-3 or HA-5 (ZX-Series Loudspeakers Only)
Remove the M10 bolts that secure the handle to the loudspeaker, and fasten the HA-3 or HA-5 bracket in its place
(see Figure 4).
Figure 3:
Adjusting the Loudspeaker Attachment Point on the VSA-1
Figure 4a:
Removing the
Bolts Securing the Handle
Figure 4c:
Attaching the VSA-1
to the HA-3 or HA-5 Handle Adaptor
Figure 4b:
Attaching the HA-3 or
HA-5 to the ZX Loudspeaker
Attachment
Point for all 12”
Loudspeakers
Attachment
Point for all 15”
Loudspeakers
Top of
Assembly
Bottom of
Assembly
