Architecture & Engineering Specs:
The loudspeaker shall be a two-way system consisting of one 6”
(152mm) low-frequency transducer, a 1” (25mm) high-frequency
transducer with a Coherent Coverage Waveguide, and a frequency-
dividing network installed in a vented, line-array enclosure. The
network shall include a passive limiter for both the low-frequency
and high-frequency transducers. The loudspeaker system shall meet
the following performance criteria: Power handling, 250-Watts long
term program using IEC268-5 shaped pink noise; Frequency
response, 46 Hz - 20 kHz (-10 dB from rated sensitivity); Pressure
sensitivity, 90 dB at one watt, 200 Hz -10 kHz at one meter; Impedance,
8 ohms nominal, 6 ohms minimum. The high-frequency transducer
shall drive a waveguide to cover evenly 100° horizontally by 100°
vertically. The enclosure shall be molded of acrylic butyl styrene. The
enclosure shall be 16.5” (419mm) high, 9” (228mm) wide, 11.75”
(298mm) deep. The finish shall be a paintable black. The grille shall
be zinc plated, powder coated for corrosion resistance, and
restrained with a safety leash. The loudspeaker shall be adjustable
over a range of 100° horizontally and 90° vertically. The support
bracket shall be low profile and integral with the enclosure.
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at:
866/78AUDIO
Specifications subject to change without notice.
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 6/2002
Part Number 38110-153 Rev A
Beamwidth:
Frequency Response and Impedance:
Directivity:
Block Diagram:
Side
Wall Plate
Front
Top
Dimension Drawings:
