RE97-2Tx
Low Profile, Head-worn, Omni-directional, Condenser Microphone
Application Notes:
Figure 1. Unlocking and Rotating the Earloops
Using your RE97-2Tx
Earloops:
The RE97-2Tx arrives with the earloops in the flat storage position. To change the position of the earloops,
first pull the base of the earloop straight away from the headband while gripping the cylindrical connector
(Figure 1).
Next, rotate the earloop 90 degrees, and release. The earloop will “lock” into place when positioned
correctly. To replace the RE97-2Tx in the gig bag, repeat this procedure to flatten the earloops.
Note: You may wear the mic boom on either side of the face. To change sides, simply rotate both earloops
180 degrees.
Headband and Microphone Placement:
Before placing on the user’s head, expand the headband to the largest position by moving the sliders
toward each other until they almost touch (Figure 2).
Figure 2. Headband in the Largest Position
2
