Electro-Voice EVID-P6.2B, Руководство по установке

Страница: 14 / 20

14 en | Wiring EVID Pendant Speaker
2018.09 | 03 | F.01U.358.439 Installation manual Electro-Voice
Plugging in the connector
When all wiring has been completed to the connector, plug the input connector (A) into the
socket in the speaker's terminal cup (B).
Input
connector (A) Input
connector (A)
Terminal
cup (B)
4.2 Step 2 – Adjust tap selector
The tap selector switch is located on the front baffle. Adjust the speaker to the appropriate
tap setting before installing the grille. In some 70V/100V constant voltage installations it is
advisable to leave the grilles off if final speaker audio level balance adjustments are to be
made later. After the levels are adjusted the grilles can then be installed.
Figure 4.4: Adjust tap selector
4.3 Step 3 – Attach the grille
INSTALLATION NOTE: GRILLE SAFETY FEATURE
EVID grilles features a unique safety tether to prevent the grille from falling if the grille is
removed or comes loose after installation.
First, install the grille’s safety tether by pushing the grille fastener into the hole in the front of
the baffle. Second, press the grille into place until the front of the grille is flush with the rim of
the baffle. Make sure the grille is securely seated to prevent it from vibrating loose.
If you need to remove the grille, the easiest way is to use the provided grille removal tool, then
apply slow even pressure to pull down on the grille until it detaches from the speaker. The
grille is attached magnetically to the speaker.