Electro-Voice Ceiling Speaker User Manual
1
2
9
Installation and Wiring
Step 7: Attach the Grille
First, install the grille’s safety tether by pushing the grille fastener into the
hole in the front of the baffle, as shown in Figure 11. Second, press the grille
into place until the front of the grille is flush with the rim of the baffle. Make
sure the grille is securely seated to prevent it from vibrating loose.
If you need to remove the grille, the easiest way is to insert two bent paper
clips or other pointed objects into holes in the grille, then apply slow even
pressure to pull down on the grille until that section of the grille comes out
slightly. Continue the same procedure around the perimeter of the grille,
loosening a portion at a time until the grille is removed.
InSTALLATIOn nOTE: GRILLE SAFETy FEATURE
Electro-Voice grilles features a unique safety tether to prevent the grille from
falling if the grille is removed or comes loose after installation.
Figure 11:
Attach the Grille
