Electro-Voice Ceiling Speaker User Manual
8
Installation and Wiring
Step 5: Mount the Speaker Into the Ceiling
Push the speaker into the ceiling hole until the front baffle rim is flush with
the ceiling, as shown in Figure 8. Tighten the mounting tabs by turning
the screw clockwise until the speaker is secure. Please note that the first
clockwise quarter-turn rotates the attachment tabs outward. The remaining
turns tighten the tabs down onto the back of the ceiling surface, as shown in
Figure 9.
InSTALLATIOn nOTE: MOUnTInG TAbS
For each attachment screw, first turn one half-turn counterclockwise to
release the mounting tab from its guide.
Step 6: Adjust Tap Selector
The tap selector switch is located on the front baffle. Adjust the speaker
to the appropriate tap setting, as shown in Figure 10, before installing the
grille. In some 70V/100V constant voltage installations it is advisable to
leave the grilles off if final speaker audio level balance adjustments are to be
made later. After the levels are adjusted the grilles can then be installed.
Figure 10:
Adjust Tap Selector
Figure 8:
Mount Speaker to Ceiling
Figure 9:
Tighten Mounting Tabs
