www.electromax.ro
Pag. 6
AERO -
Waggy
The Waggy LED high intensity runway guard light consists of two high intensity yellow LED arrays,
mounted side by side that flash alternately. Typically, runway guard lights are installed in pairs, one
on either side of a taxiway and are used to clearly identify taxiway hold positions to pilots.
The Waggy can be supplied in either in a 230/240V AC powered configuration
Order code: AL-026-
48-AM
, or a 6.6Amp AGL series circuit
Order code: AL-037-48-AM
.
The 6.6Amp AGL version will operate with either 3 or 5 step CCRs (2.4-6.6Amp) and the light output
will vary with input current.
The 230/240V version can be supplied with an optional photocell which will automatically switch the
runway guard light into night mode in low ambient light levels.
1. INTRODUCTION
The APOLLO LED high intensity runway guard li
ght has been designed to meet the requirements of:
ICAO
:
Annex 14, Volume I - Aerodr
ome Design and Operations
FAA
:
AC 1
50/5345-53 - Specifications for runway and taxiway light fixtures
AC 150/5345-46c - Airport winter safety and operations
AC 150/5200-30 - Design and installation details for airport visual aids
AC 150/5340-30 - Airport lighting equipment certification program
MIL-STD-810F
Military Standard - Enviromental test methods and engineering guidelines
1.1 COMPLIANCE WITH STANDARDS
