Copyright © 2006 Electro-Matic Products, Inc. All rights reserved.
21
Version 4.0 • 4U2SEE
™
Enchanced Version Advanced Display Protocol (ADP)
DEFAULT INSTRUCTIONS E# COMMANDS • 6.2.1
S - Specifies Speed of characters moving across face of sign
s - Sets the Speed of characters moving across the sign face attribute (setting).
1= Slowest Speed
<0x01>Z00<0x02>E#S1<0x04>
2= Slow Speed
<0x01>Z00<0x02>E#S2<0x04>
3= Medium Speed (Factory default) <0x01>Z00<0x02>E#S3<0x04>
4= Fast Speed
<0x01>Z00<0x02>E#S4<0x04>
5= Fastest Speed
<0x01>Z00<0x02>E#S5<0x04>
T- Specifies Stay Time between Frames of messages
t– Sets the Stay Time between Frames of messages attribute (setting).
1 second
<0x01>Z00<0x02>E#T1<0x04>
2 seconds
<0x01>Z00<0x02>E#T2<0x04>
3 seconds (Factory Default) <0x01>Z00<0x02>E#T3<0x04>
4 seconds
<0x01>Z00<0x02>E#T4<0x04>
5 seconds
<0x01>Z00<0x02>E#T5<0x04>
6 seconds
<0x01>Z00<0x02>E#T6<0x04>
7 seconds
<0x01>Z00<0x02>E#T7<0x04>
8 seconds
<0x01>Z00<0x02>E#T8<0x04>
9 seconds
<0x01>Z00<0x02>E#T9<0x04>
V- Specifies Horizontal Justification
v – Sets the Horizontal Justification attribute (setting).
R= Right
<0x01>Z00<0x02>E#VR<0x04>
L= Left
<0x01>Z00<0x02>E#VL<0x04>
C= Center (Factory default)
<0x01>Z00<0x02>E#VC<0x04>
W- Specifies Word Wrap
w – Sets the Word wrap attribute (setting).
0= OFF Text will move across face from left to right
<0x01>Z00<0x02>E#W0<0x04>
1= On (Factory default)
<0x01>Z00<0x02>E#W1<0x04>
Examples of setting defaults are shown below:
<0x01>Z00<0x02>E#C1DEF1Mb<0x04>
In the above example the default character color would be red, the default drive being “E:” (flash), the
default font size being normal 7 and the default in mode would hold.
<0x01>Z01<0x02>E#C1DEF1<0x04>
In the above example the default character color would red, the default drive being “E:” (flash) and
the default font size being normal 7.
<0x01>Z00<0x02>E#C3B2F0L2T3S5VCHFW1MaObDE<0x04>
This above default customization example would alter all factory default settings, some are not
changed – next example will display the same as above example, because the unspecified defaults
do not change from the factory settings. In the above and below examples, text character color
is yellow, the background color is green, the font is normal 5, the line spacing is 2 pixels, the stay
time is 3 (shown in above example, but not shown in following example), the speed is 3 (shown in
above example, but not shown in following example), the horizontal justification is center (shown in
above example, but not shown in following example), the vertical justification is fill (shown in above
example, but not shown in following example), the wordwrap is 1 (shown in above example, but not
shown in following example), The inward action mode is a (rotate - see section 6.3.2 and table 8), The
outgoing action mode is b (hold – see section 6.3.2 and table 8) and the default drive is set to E.
<0x01>Z00<0x02>E#C3B2F0L2MaObDE<0x04>
PLEASE NOTE:
1) Same foreground and background color will make the 4U2SEE virtually unreadable.
Example: <0x01>Z00<0x02>E#C2B2<0x04>
2) All non-prescribed default customization variables with attributes use factory settings – meaning
all unset default variables will revert to factory settings.
3) Default customization can not be accomplished in 4U2SEE firmware versions prior to version
8E04.
