Electro Industries Mini-Boiler EMB-S-1 Скачать руководство пользователя страница 20

 

 

Page 2 of 2 

XX017 

CONDITIONS AND LIMITATIONS: 

1.  This warranty is limited to residential, single family dwelling installations only.  Any commercial or multi-unit 

dwelling installations fall under the Electro Industries Commercial Limited Product Warranty. 

2.  Electro Industries, Inc. shall not be liable for performance related issues resulting from improper installation, 

improper sizing, improper duct or distribution system, or any other installation deficiencies. 

3.  If at the time of a request for service the original owner cannot provide an original sales receipt or a warranty 

card registration then the warranty period for the product will have deemed to begin the date the product is 
shipped from the factory and 

NOT

 the date of original purchase. 

4.  The product must have been sold and installed by a licensed electrician, plumbing, or heating contractor. 

5.  The application and installation of the product must be in compliance with Electro Industries, Inc. specifications, 

as stated in the installation and instruction manual, and all state, provincial and federal codes and statutes.  If 
not, the warranty will be null and void. 

6.  The purchaser shall have maintained the product in accordance with the manual that accompanies the unit.  

Annually, a qualified and licensed contractor must inspect the product to assure it is in proper working condition. 

7.  All related heating components must be maintained in good operating condition. 

8.  All lines must be checked to confirm that all condensation drains properly from the unit. 

9.  Replacement of a product or product part under this limited warranty does not extend the warranty term or 

period. 

10.  Replacement product parts are warranted to be free from defects in material and workmanship for ninety (90) 

days from the date of installation.  All exclusions, conditions, and limitations expressed in this warranty apply. 

11.  Before warranty claims will be honored, Electro Industries, Inc. shall have the opportunity to directly, or through 

its authorized representative, examine and inspect the alleged defective product or product parts. Remedies 
under this warranty are limited to repairing or replacing alleged defective product or product parts.  The decision 
whether to repair or, in the alternative, replace products or product parts shall be made by Electro Industries, Inc. 
or its authorized representative. 

THIS WARRANTY DOES NOT COVER: 

1.  Costs for labor for diagnosis, removal or reinstallation of an alleged defective product or product part, 

transportation to Electro Industries, Inc., and any other materials necessary to perform the exchange, except as 
stated in this warranty.  Replacement material will be invoiced to the distributor in the usual manner and will be 
subject to adjustment upon verification of defect. 

2.  Any product or product part that has been damaged as a result of being improperly serviced or operated, 

including, but not limited to, the following: operated during construction phase, with insufficient water or air flow; 
allowed to freeze; subjected to flood conditions; subjected to improper voltages or power supplies; operated with 
air flow or water conditions and/or fuels or additives which cause unusual deposits or corrosion in or on the 
product; chemical or galvanic erosion; improper maintenance or subject to any other abuse or negligence. 

3.  Any product or product part that has been damaged as a result of natural disasters, including, but not limited to, 

lightning, fire, earthquake, hurricanes, tornadoes or floods. 

4.  Any product or product part that has been damaged as a result of shipment or handling by the freight carrier.  It 

is the receiver’s responsibility to claim and process freight damage with the carrier. 

5.  Any product or product part that has been defaced, abused or suffered unusual wear and tear as determined by 

Electro Industries, Inc. or its authorized representative. 

6.  Workmanship of any installer of the product or product part.  This warranty does not assume any liability of any 

nature for unsatisfactory performance caused by improper installation. 

7.  Transportation charges for any replacement product, product part or component, service calls, normal 

maintenance; replacement of fuses, filters, refrigerant, etc. 

 

 

THESE WARRANTIES DO NOT EXTEND TO ANYONE EXCEPT THE ORIGINAL PURCHASER AT RETAIL AND ONLY WHEN THE PRODUCT IS 
IN THE ORIGINAL INSTALLATION SITE.  THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE. 

ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE 
HEREBY DISCLAIMED WITH RESPECT TO ALL PURCHASERS OR OWNERS.  ELECTRO INDUSTRIES, INC. IS NOT BOUND BY PROMISES 
MADE BY OTHERS BEYOND THE TERMS OF THESE WARRANTIES.  FAILURE TO RETURN THE WARRANTY CARD SHALL HAVE NO 
EFFECT ON THE DISCLAIMER OF THESE IMPLIED WARRANTIES. 

ALL EXPRESS WARRANTIES SHALL BE LIMITED TO THE DURATION OF THIS EXPRESS LIMITED WARRANTIES SET FORTH HEREIN AND 
EXCLUDE ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM THE BREACH THEREOF.  SOME STATES 
OR PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE 
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY.  PRODUCTS OR PARTS OF OTHER MANUFACTURERS ATTACHED ARE SPECIFICALLY 
EXCLUDED FROM THE WARRANTY. 

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH VARY UNDER THE LAWS OF EACH 
STATE. IF ANY PROVISION OF THIS WARRANTY IS PROHIBITED OR INVALID UNDER APPLICABLE STATE OR PROVINCIAL LAW, THAT 
PROVISION SHALL BE INEFFECTIVE TO THE EXTENT OF THE PROHIBITION OR INVALIDITY WITHOUT INVALIDATING THE REMAINDER OF 
THE AFFECTED PROVISION OR THE OTHER PROVISIONS OF THIS WARRANTY.

 

Содержание Mini-Boiler EMB-S-1





















Отзывы: