background image

 

Page 1 of 2 

XX017 

 

Electro Industries, Inc. Residential 

Limited Product Warranty 

Effective November 1, 2009 

 
 
Electro Industries, Inc. warrants to the original owner, at the original installation site, for a period of two (2) 
years from date of original purchase, that the product and product parts manufactured by Electro 
Industries, Inc. are free from manufacturing defects in materials and workmanship, when used under 
normal conditions and when such product has not been modified or changed in any manner after leaving 
the plant of Electro Industries, Inc.  If any product or product parts manufactured by Electro Industries, 
Inc. are found to have manufacturing defects in materials or workmanship, such will be repaired or 
replaced by Electro Industries, Inc.  Electro Industries, Inc., shall have the opportunity to directly, or 
through its authorized representative, examine and inspect the alleged defective product or product parts.  
Electro Industries, Inc. may request that the materials be returned to Electro Industries, Inc. at owner’s 
expense for factory inspection.  The determination as to whether product or product parts shall be 
repaired, or in the alternative, replaced, shall be made by Electro Industries, Inc. or its authorized 
representative.   
 
Electro Industries, Inc. will cover labor costs according to the Repair / Replacement Labor Allowance 
Schedule for a period of ninety (90) days from the date of original purchase, to the original owner, at the 
original installation site.  The Repair / Replacement Labor Allowance is designed to reduce the cost of 
repairs.  This Repair / Replacement Labor Allowance may not cover the entire labor fee charged by your 
dealer / contractor. 
 
 

TWENTY YEAR (20) LIMITED WARRANTY ON BOILER ELEMENTS AND VESSELS 

Electro Industries, Inc. warrants that the boiler elements and vessels of its products are free from defects 
in materials and workmanship through the twentieth year following date of original purchase.  If any boiler 
elements or vessels are found to have a manufacturing defect in materials or workmanship, Electro 
Industries, Inc. will replace them. 

 
TWENTY YEAR (20) LIMITED WARRANTY ON SPIN FIN ELEMENTS 

Electro Industries, Inc. warrants that the spin fin elements of its products are free from defects in materials 
and workmanship through the twentieth year following date of original purchase.  If any spin fin elements 
are found to have a manufacturing defect in materials or workmanship, Electro Industries, Inc. will replace 
them. 

 
FIVE YEAR (5) LIMITED WARRANTY ON OPEN WIRE ELEMENTS 

 

Electro Industries, Inc. warrants that the open wire elements of its products are free from defects in 
materials and workmanship through the fifth year following date of original purchase.  If any open wire 
elements are found to have a manufacturing defect in materials or workmanship, Electro Industries, Inc. 
will replace them.

Содержание EM-MB00

















Отзывы: