16
loaded.
Please Note:
The current knob positions are no longer valid.
2.
Use the MODE knob and the PRESET/TUNE FSW.
a.
Turn the MODE knob so the preset number where the preset was
saved is selected.
b.
Press and release the PRESET Footswitch. The PRESET LED will light
up to indicate that the Preset has loaded.
Please Note:
The current
knob positions are no longer valid.
After loading a preset, if you move a knob, the knob’s new location will supersede the
preset’s stored value for that knob. At this point, the PRESET LED will blink rapidly to
indicate that a knob has been moved.
In addition, after loading a preset, if you use the MODE knob to scroll to another preset,
the previously recalled preset will remain loaded. At this point you could save the currently
loaded preset into another preset location by holding the MODE knob or press the
PRESET/TUNE FSW to load a different preset.
PRESET UNLOAD PROCEDURE:
A preset can be unloaded to restore the current knob positions so they represent what you
hear. Turn the MODE knob clockwise until no LEDs are lit to unload the current preset and
restore the sound to the current knob settings.
HOW TO RESTORE FACTORY PRESETS IN THE RING THING:
1. Press and hold down the Encoder SW (white knob) and the PRESET
FSW while applying power.
2. After applying power, continue to hold down both switches until you
see the LED Ladder blink rapidly. At this point you can release the
switches; the factory presets have been restored.
