ELECTRO FREEZE CS700, Руководство оператора

Страница: 27 / 65

123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
ELECTRO FREEZE Shake Model CS700
184602
19
7 Assembly
— continued
Figure 7-6
Important:
ALWAYS make sure the head bushing is
positioned in the head properly (see Figure
7-4). The head is slotted to match the key
on the bushing. Make sure the key aligns
with the slot. Failure to install the bushing
properly in the dispensing head will
damage the head.
9. Install the dispensing head onto the
freezer by tilting the top of the head towards
you, aligning the studs with the holes in the
head, and sliding toward the freezer. As you
push the head towards the freezer, carefully
rock it into place, and align the shaft with the
drive coupling.
10. Tighten the hand knobs (13)
simultaneoulsy, finger-tight only.
Important:
Excessive force will damage the head. Do
not use tools to tighten.
11. Hook the handle (8) into the slot on
the plunger (6).
12. Install the plunger rod (7).
13. Install the pivot post (14) or mixer
(optional).
14. Insert the keeper (11) through the
holes in the handle (8) and head (1) and lock in
place.
Do not lubricate.
16. See Figure 7-6. Install the o-ring (3)
on the mix feed insert (2) and lubricate. Then
install the o-rings (4) on the mix feed tube (1)
The mix feed tube o-rings do not need to be
lubricated.
16. Lay the mix feed tube assembly in
the hopper pan. (Do not install in the mix feed
port at this time.)
Tube-Mix
Feed
O-Ring
O-Ring
Insert-Assy.
Mix Feed