11
OPERATION
SETTINGS
DESCRIPTION
0
Element off
1-3
Delicate warming
4-5
Gentle simmering
6-7
Reheat and rapid simmering
8
Boiling sauté and searing
9
Maximum heat
P
Boost function
Upon start up all displays are illuminated. After this, the hob is in
stand-by mode and ready for operation.
TURNING THE APPLIANCE ON/OFF
•
Switch the hob on by pressing the ON/ OFF button. All heater
displays show a static “0” and the bottom right dots flash.
•
If a cooking-zone is not selected within 20 seconds, the hob will
automatically switch of).
•
Switch the hob off at any time by pressing the ON/OFF button
USING THE COOKING ZONES
•
Press the heater selection button that corresponds to the heater
you wish to use. A static dot will be shown on the selected heater
display and the blinking dots on all other heater displays will no
longer illuminate. Select the temperature setting by using the
increase heat setting button or decrease heat setting button.
•
For faster boil times, select the desired cooking level, then touch
the 'P' button to activate the Boost function. To turn the element off,
turn the temperature down to “0”. (Pressing the increase and
decrease buttons simultaneously also turns the temperature to “0”).