8
CLEANING
Wash all parts except the motor base in warm, soapy water. The discs can be
disassembled to wash with water. Care should be taken during disassembly to
prevent damage or injury.
DO NOT PUT ANY PARTS IN A DISHWASHER.
DO NOT IMMERSE THE MOTOR BASE IN WATER.
TROUBLESHOOTING
Problem
Solution
Machine does not
work.
Ensure the unit is correctly assembled.
Make sure the plug is fully inserted into the socket
Check if the mains have tripped, or if there is a power
outage.
Machine stops
running suddenly.
The processing bowl may loosen during vigorous
processing. Please re-install the bowl cover.
The thermal cut-out may have activated, Leave the
appliance to cool to room temperature and try again
Motor is running, while
components do not
run.
Make sure the Driver is installed correctly.
Can I clean the
removable parts in the
dishwasher?
No, all the accessories are designed to be washed by
hand only
Can I pour boiling hot
ingredients into the
blender jar?
No, let the liquids or ingredients cool down to below 80°C
to avoid damaging the accessories
Why does the motor
produce an
unpleasant smell
during processing?
It is very common for a new appliance to give off an
unpleasant smell or emit some smoke the first few times it
is used .This phenomenon will stop after you have used
the appliance a number of times. The appliance may also
give off an unpleasant smell or emit some smoke if it has
been used too long. In that case you have to switch the
appliance off and let it cool down for 60 minutes.
What should I do
when the blade unit or
motor gets blocked
during processing?
Switch the appliance off and use a spatula to dislodge the
ingredients that block the blade unit. We would also
recommend processing a smaller quantity of ingredients.
What should I do if the
blender leaks?
Switch the appliance off and pour out the ingredients.
Then remove the blade unit interface. Check if the sealing
ring has been assembled properly on the blade unit.
