ElectrIQ eiQ60touchslimhe, Руководство пользователя

Страница: 10 / 14

10
INSTALLING GREASE MESH FILTERS
• To install filters for the following four steps.
•
Angle the filter into slots at the back of the hood.
•
Push the button on handle of the filter.
•
Release the handle once the filter fits into a resting
position.
•
Repeat to install all filters.
Replacements are available from the retailer the hood
was purchased from under reference:
60cm version eiqm60cfilter x 2
90cm version eiqmchimfilter90 x 3
CARBON FILTER-not supplied
Activated carbon filter can be used to trap odors. Normally the activated carbon filter
should be changed at three or six months according to your cooking habit. The
installation procedure of activated carbon filter is as below.
Replacements are available from the retailer the hood was purchased from under
reference:
eiqmidcarbon
(1) The aluminum filter should be detached first. Press the lock and pull it downward.
(2) The dismantle method of carbon filter can refer to below pictures.
(3) Take out the carbon filter and change it with a new one.
(4) Apply reverse procedure to install the charcoal filter.
(5) Put the aluminium filter back.
NOTE:
•
Make sure the filter is securely locked. Otherwise, it would loosen and cause
dangerous.
•
When activated carbon filter attached, the suction power will be lowered.
CHARCOAL FILTER
Remove the metal grease filters. Remove the saturated
activated charcoal filter. Fit the new filters. Replace the
metal grease filters
.