ElectrIQ eiQ-R900M, Руководство пользователя

Страница: 9 / 23

9
Notes:
1. The robot is suitable for hard floor and low to medium pile carpet.
2. This robot is not suitable for very uneven surface. Do not use in long pile/tick
carpet. Fold carpet fringes under the carpet before starting operation
3. Please note that this robot will collect dust and small particles. It will not
clean paper, plastic bags and other large debris. It will get entangled in wires,
so please declutter floor surfaces before using
4. Do not leave bottles, lamps or other breakables on the floor
5. Do not use in tight spaces less than 38 cm wide as the robot may get blocked
6. Do not use on wet or greasy dust.
Battery installation and charging
The robot battery is user replaceable. If the battery stops keeping its hold please
re-order replacement from the manufacturer or service centre.
Battery Installation
1. When fully charged plug out the charger and power cord. An alarm sound will play.
2. Push the dust-bin release button and pull out the dust-bin. Flip the robot over, and
push the battery into the slot.
3. Push the battery until clicks in.
4. Flip the robot over again, and insert the dust bin back into the body if the robot.
Battery Removal
1. Remove the dust-bin first and flip the robot over.
2. Push the two battery hook buttons simultaneously. The battery will pop out
automatically.
3. Remove the battery