ElectrIQ eiQ-R900M, Руководство пользователя

Страница: 17 / 23

17
12. To check the programmed cleaning time, press and hold the “Schedule” button.
13. For changing or deleting the set schedule, repeat the previous setting process.
Auto Start
When the robot is docked and recharging.
1. Press the "Start" button. The LCD display will show "AUTO". The robot will start
one cleaning cycle as soon as the battery is fully charged.
2. Press the "Start" button and hold it for 3 seconds. The robot will stop its
recharging process and leave the dock immediately for one cleaning cycle
Cleaning and Maintenance
1. Make sure the unit is unplugged before performing any cleaning operation.
2. Before first use and continuing after each use, wipe off unit with a damp
cloth and dry thoroughly.
3. Clean all the brushes and empty the rubbish container. Vacuum or wipe with
a cleaning wipe the inside of the container.
4. DO NOT immerse the robot or the power supply in any liquid.
5. Reassemble the unit following the instructions and charge it before the next
use.
6. Store the robot in a cool and dry place.
Dust bin and filter cleaning
Basic Cleaning
1. Press the Dust Bin Release Button to remove the dust-bin.
2. Press the side button to release the dust compartment.
3. Remove the debris filter.
4. Empty all dust and shake off all debris.
5. Remove the dust filter.
6. Use the included brush to wipe out the dust filter and debris filter.
Deep Cleaning
1. Carefully separate the dust compartment from the robot body.
2. Gently wash the dust compartment and debris filter.
3. Wipe them thoroughly with a cloth and let it rest until completely dry