27
SIGNAL INFORMATION (USED ONLY IN DTV)
1. Press the
▲/▼ buttons to select "Signal Information" option.
2. Press the
"OK" or ► button to see the information for the DTV channel.
Note:
Signal Quality/Signal Strength (DTV Only):
Unlike analogue channels, which can vary in reception quality, digital channels must have
perfect reception quality or you will not receive them at all. As such you are not able fine
tune a digital channel. If the signal strength indicates that the signal is weak, a possible
solution is to adjust your antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest signal.
OAD (On Air Download)
This option is used to enable or disable system software update contained in DTV broadcasts.
1. Press the
▲/▼ buttons to select “OAD” option.
2. Press the
◄/► buttons to select “On” or “Off”.
Note: This option is only used in DTV mode.
OAD Scan
This option only used in DTV mode.
1. Press the
▲/▼ button to select “OAD Scan” option.
2. Press the OK button to search for system software update files from DTV broadcasts.
CI Information
1. Press the
▲/▼ buttons to choose “CI information” and enter the menu.
2.
Press “OK” button, you can see specific CI information including CI Module information, smart
card information, etc.
Note: This option is only used in DTV mode.
LNB Setting
1. Press the
▲/▼ buttons to choose “LNB Setting” item.
2.
Press “OK” button to display LNB Setting menu.
You can set specific setting to search DVB-S channels.
Note: This option is only used in DVB-S mode.