8
CABLE MANAGEMENT
The cover can be removed from the rear of the stand. Cables can then be threaded
through the stand, up to the terminals. Once the cables are in position, replace the
cover on the rear of the
DO NOT put pressure on the screen when moving or positioning the monitor.
NOTES:
⚫
Due to the heavy weight and dimensions of the LCD screens and their fragile
nature, we recommend that they are unpacked and assembled by 2 people and
professional installers are used to wall mount them (Wall mounting is optional). If
you do not understand the instructions, or are unsure how to install this product,
please contact a professional for assembly advice and assistance.
⚫
Careful consideration should be made regarding the location the monitor is to be
wall mounted as some walls are not suitable for installation. If the monitor is to be
mounted on drywall, the mount must be anchored into a wooden stud, concrete
block or brick behind the drywall. Installing on drywall alone may not support the
weight of the display.
⚫
When drilling holes, it is particularly important to take care of electrical cables,
water or gas pipes in the wall. Please follow the instructions provided by the wall
bracket manufacturer and ensure that all fixing screws supplied are used.
⚫
electriQ and its distributors and dealers are not liable or responsible for damage or
injury caused by improper installation, improper use or failure to observe these
safety instructions. In such cases any guarantee will expire.
