7
OPERATION
MANUAL CONTROL
Adjust your desired temperature room temperature using the “-” and “+” buttons,
after 2 seconds the updated desired temperature will be set.
TEMPERATURE CALIBRATION
If you find that the temperature display is not showing an accurate reflection of the
room temperature, it can be adjusted. Press and hold the “-” button for 5 seconds to
enter temperature calibration. The amount the temperature is changed by can be
adjusted using the “-” or “+” buttons (Range: -5 to 5⁰C)
TIMER
The inbuilt timer will allow you to set the unit to turn off after a set period of time.
Please note this timer is a one-use timer, and starts operation when programmed.
1.
While the unit is operating, press the TIMER button to activate the timer.
2.
Use the Tempe and – buttons to adjust its duration.
3.
Once the set time has elapsed, the unit will turn off automatically.
Press the POWER button before the time has elapsed, the timer will be cancelled
and the unit will turn off.
OPEN WINDOW DETECTION
This heater is equipped with an open window detection function. If the room
temperature decreases dramatically in a short period of time it will recognize that a
window is open. The window sign on the screen will start to flash and the heater will
enter standby for 30 minutes. You can deactivate and activate this function holding
the Timer button for 5 seconds, and the open window sign on the screen will
disappear.
