5
ASSEMBLY
To assemble the handlebar, it must
fi
rst be
fi
tted into the top of the handlebar stem. Slide the
silver base of the handlebars into the stem and align the 4 holes (2 on either side). Then insert
the 4 bolts provided loosely into the holes. Once all 4 are in posi
ti
on
tig
hten them to
fi
x the
handlebar into place, taking care not to damage any of the interior wiring.
FIRST USE
IMPORTANT
:
Before using the scooter for the
fi
rst
ti
me, fully charge the ba
tt
ery. A
ft
er turning
on the scooter, check the ba
tt
ery power on the display and verify that all lights are working.
•
Remove the protec
tiv
e cover from the charging port on the scooter.
•
Ensure that the charging port is dry and not damaged before inser
ti
ng the charger into the
port. (Refer to the scooter diagram for loca
ti
on).
•
When the indicator on the charger is red, the scooter is charging.
•
The indicator light on the charger will turn green when the ba
tt
ery is fully charged. This
usually takes 5-6 hours.
•
Do not over charge as long-term ba
tt
ery life may be a
ff
ected. Do not leave una
tt
ended while
charging.
•
When charging has completed, remove the charger and ensure that the protec
tive
cover is
placed securely over the charging port.
