10
2. Continuous draining
Water can be automatically plumbed in or drained into sink, a larger
recipient or through the wall into an outside drain by attaching a pipe
to the unit (10 mm internal diameter) (not included). Insert the pipe
into the drain outlet at the back of the unit as shown in here. Make
sure the connection between pipe and the drain outlet is tight and
does not leak. Then direct the pipe to a suitable drainage point. This
unit uses gravity fall to dispose water hence the drain should be
lower than the unit water outlet. Put the tank back. Be sure to run
the water pipe downward and let the water to flow out smoothly. Do
not kink or bend the pipe.
NOTE: When the continuous drain feature is not being used,
remove the drain hose from the outlet and place back the rubber
bung.
The permanent drain can be used in conjunction with water pump (e.g. when draining a
cellar) to lift the water upwards.
Care and Maintenance
Always shut off the unit and unplug from the mains before cleaning or performing any
maintenance. When it is not in use for long periods it is advisable to remove the plug from
the power socket. Do not use chemical solvents (such as benzene, alcohol or gasoline) as
they may cause irreversible damage to the unit.
1. Clean the Grille and Case
Use water and a mild detergent to clean the washable filters. Do not use bleach or abrasives. Do not
splash water directly onto the main unit. Doing so may cause an electrical shock and can lead to the
insulation to deteriorate, or cause the unit to rust. The air intake and outlet grilles get soiled easily, so
use a vacuum attachment or soft brush to clean. Wipe the dehumidifier body with a soft damp cloth
or kitchen towel.
Remove the ABS frame and pull out the filters from the frame. Hoover gently the optional carbon and
3M filters once every 2-3 weeks approximately.
All manuals and user guides at all-guides.com
all-guides.com