9
turned on. Excess moisture is dispersed throughout your home. For this reason, the dehumidifier
should be positioned in a central and clear location so that it can draw this moist air towards it from
all over the home. A warm hallway or landing is an excellent position for your dehumidifier. If possible,
leave interior doors ajar to allow air circulation.
Alternatively, if you have a serious problem in one area you can begin by positioning the dehumidifier
there and moving it to a more central location at a later date. For the most effective use, run your
dehumidifier with external doors and windows kept closed. Please note the unit should not be placed
directly against a radiator or other heat source.
When positioning your ELECTRIQ dehumidifier, ensure that it is placed clear of any obstacle that may
limit the air movement. Place the dehumidifier on a flat dry surface.
Note:
Do not force castors to move over carpet or uneven surfaces, nor move the unit with water in
the tank as it may tip over and spill water.
Water Drainage
When the water tank is full, the unit will stop automatically. When this happens the
tank full
red
code will show on the control panel.
Note:
Only empty the water tank when is full or before moving or storing the unit.
There are two ways to dispense collected water.
1. Use the tank.
When the tank is full, the unit will automatically stop running, and the Full indicator light will
flash.
Slowly pull out the tank. Grip the left and right sides with both hands securely, and carefully
pull out straight so water does not spill. Do not rest the tank on the floor
because the bottom of the tank is uneven and tank will fall and cause the
water to spill. Empty the water tank and reinsert it into the dehumidifier.
The tank must be in place and securely seated for the dehumidifier to
operate again.
The dehumidifier will re-start when the tank is
restored in its correct position.
NOTES:
When you remove the bucket, do not touch sensors or any
parts which are situated behind tank. Doing so may damage
the product. Be sure to push the tank gently all the way into
the unit. Banging the bucket against anything or failing to
push it in securely into place may cause the unit not to
operate.
Do not remove the float from the water tank. The water full
sensor will no longer be able to detect the water level
correctly without the float and water may leak from the
water tank.
All manuals and user guides at all-guides.com