9
Seat arms installation and adjustment
Your UltraLite Vehicle may be equipped with Width Adjustable Folding Arms on the seat.
To install the arms
1. Loosen the Adjustment Knobs on the Arm Receiver under the rear of the seat (Figure 6).
2. Slide the square end of the Arm into the Arm Receiver and position the Arm at the desired width (Figure 7).
3. Firmly tighten the Adjustment Knobs to secure the arms.
The arms may be readjusted at any time by loosening the knobs and sliding the arms inward or outward and
re-tightening the knobs.
Armrest Adjustment
When getting seated on the scooter lift the armrest up.
When riding always have the armrest in the down position.
Avoid pinching fingers as you lower the armrest. Never drive
with the armrest up.
Figure 6 - Adjustment knob
Figure 7 - Arm receiver
Figure 8 - Armrest in raised position
Warning!
Never use the arms of the vehicle for transfers. The arms are designed for comfort and
convenience only and will not support your weight during transfers.
Be sure to tighten the adjustment knobs securely. To ensure that the user is sitting centrally, the armrests
should always be adjusted to be equidistant from the centre of the seat. Do not adjust the arms to more
than 69 cm wide.
