13
Installing Accessories
Your UltraLite Vehicle has the following optional accessories that can be installed by the user before using.
These include:
• Folding Basket
• Headlight & Taillight
• Beverage “Caddy”
• Seat Bag
Instructions to install these accessories are provided in the following.
Installing the Folding Basket
The Folding Basket accessory can be installed in place of the existing basket as a space-saving alternative that
can be easily expanded (unfolded) when needed or collapsed (folded) to improve front end clearance of the
vehicle. The Folding Basket is installed onto the Basket Mount on the front of the tiller.
To unfold the basket:
• Flip the latch at the top up
• Pull out front and sides
• Flip bottom down until it latches with front
To fold:
• Lift bottom up towards rear
• Collapse front and sides so that they flatten against front of tiller
• Secure in folded state by latching front
Installing Headlight and Taillight
The battery-powered headlight and taillight accessories can be installed onto your vehicle for increased visibility
and safety. Both the headlight and taillight include adjustable, detachable brackets and separate light fixtures
designed for installation onto the tiller (headlight) and seat frame (taillight). The headlight accessory requires 4
AAA (LR03) batteries. The red taillight accessory requires 2 AA batteries. Batteries are not included. Install batter-
ies into the headlight by removing the 4 Philips-head screws from the back of the fixture and insert 4 AAA batter-
ies as shown. Install batteries into the taillight by prying the red lens from case and insert 2 AA batteries as indi-
cated within case. Test both fixtures before installing to ensure batteries are functioning. Attach corresponding
mounting bracket to tiller (headlight) and seat frame (taillight). Install fixtures onto brackets accordingly.
Installing the Beverage “Caddy” Accessory
This accessory allows you to use a convenient folding, adjustable Beverage “Caddy” onto your UltraLite Vehicle
to securely transport a wide assortment of cups, cans, bottles, etc. Installation consists of mounting the supplied
Cup Holder Bracket onto the tube of the tiller, then attaching the Cup Holder using the supplied hardware. Use
the following to install.
• Select desired location on tiller for Beverage “Caddy” to be installed.
• Install Round Tube Bracket and secure using supplied screw.
• Attach Cup Holder Mount onto bracket using the two supplied philips-head screws.
• Position Cup Holder onto mount and use winghead screw to attach.
Select desired positioning (pitch) before tightening winghead screw so that you can easily and comfortably reach
the Cup Holder.
Seat Bag
The Seat Bag accessory is a zippered nylon fabric bag with adjustable straps to attach it to the backrest of the
seat. To install, loop straps around front of backrest and tighten straps to secure.
