20
GB
Declaration of compliance
We hereby declare, that
CORDLESS CERAMIC
HAIR STRAIGHTENERS
70273 (TA-227)
230 V - 40 W
has been manufactured in accordance
with the following standards or normative
documents:
EN 55014-1:2006
EN 55014-2:1997/+A1:2001
EN 61000-3-2:2006
EN 61000-3-3:1995/+A1:2001/+A2:2005
EN 61000-4-2:1995/+A1:1998/+A2:2001
EN 61000-4-3:2002/+A1:2002
EN 61000-4-4:2004
EN 61000-4-5:1995/+A1:2001
EN 61000-4-6:1996/+A1:2001/+A2:2006
EN 61000-4-11:2004/+A1:2001
in accordance with the provisions of the
following directives
98/37/EU
The machinery Directive with
amending directives
06/95/EEC
The Low Voltage Directive
89/336/EEC The EMC Dir
Amendment Directive
93/68/EEC
2008
Stefan Schou
Purchasing manager
10.03.2008 - HP Værktøj A/S, DK-7080 Børkop,
Denmark
Environmental information
HP Værktøj A/S endeavours to manufacture
environmentally friendly electrical and
electronic products; we also wish to
contribute to the safe disposal of waste
substances which may be environmentally
hazardous.
A healthy environment is important for
everyone, and we have therefore set
ourselves the target of complying with
the requirements in the EU’s initiatives
in this area, which means we guarantee
the environmentally sound collection,
treatment, recovery and disposal of
electronic equipment which might
otherwise harm the environment. This also
means that our products do not contain any
of the following chemicals and substances:
- Lead
- Mercury
- Cadmium
- Hexavalent chrome
- PBB (polybrominated biphenyls) (fl ame
retardants)
- PBB (polybrominated diphenyl ethers)
(fl ame retardants)
HP Værktøj A/S is proud to support the EU’s
environmental initiatives in order to play a
part in a cleaner environment and hereby
declares that our products comply with
both the WEEE Directive (2002/96/EC) and
the RoHS Directive (2002/95/EC).
As a consumer, you can also play a part in
protecting the environment by following
the applicable environmental regulations
and taking old electrical and electronic
equipment to your local recycling center.
If the equipment contains batteries, you
must remember to remove these before you
dispose of the equipment.
