Electric Druid Flangelicious, Руководство по монтажу

Страница: 8 / 10

Bill of Materials
Order Ref Description Value Quantity Done?
1 D1, D2 Signal Diode 1N4148 2
2 R1 1% Metal film resistor 1K 1
3 R2 1% Metal film resistor 1M 1
4 R3, R10, R12, R17, R28, R29 1% Metal film resistor 10K 6
5 R4, R6, R13, R14, R15,
R19, R22, R23, R26 1% Metal film resistor 100K 9
6 R5, R7, R8, R16, R21,
R24, R25 1% Metal film resistor 47K 7
7 R9, R11 1% Metal film resistor 24K 2
8 R18 1% Metal film resistor 12K 1
9 R20 1% Metal film resistor 3K3 1
10 R27 1% Metal film resistor 560R 1
11 D3 Rectifier Diode 1N4002 1
12 TL072, TL072, BBD, FLANGE IC sockets 8-pin DIP 4
13 REG1 +5V Regulator 78L05 1
14 TR1 NPN Transistor 2N3904 1
15 C14, C17, C19 Ceramic capacitor 100n 3
16 C1, C2 Film capacitor 100n 2
17 C3 Film capacitor 1n 1
18 C4, C10 Film capacitor 150p 2
19 C5 Film capacitor 33n 1
20 C6, C8 Film capacitor 470p 2
21 C7, C9 Film capacitor 3n3 2
22 C11, C12, C15 Film capacitor 470n 3
23 C13 Electrolytic capacitor 1u 1
24 C16, C18 Electrolytic capacitor 47u 2
25 PR1 Preset (Resonance Trim) 100K 1
26 PR2 Preset (Balance Trim) 10K 1
27 VR1, VR2, VR3, VR4 16mm Pots 10K Linear 4
28 Unmarked Pot dust covers or plastic
29 IC2, IC3 Dual audio op-amp TL072 2
30 IC1 Bucket Brigade Delay MN3209/07 1
31 uP1 PIC 12F1501 FLANGE 1
Additionally, you will need some/all of the offboard components listed on the
next page.
Flangelicious Construction Guide www.electricdruid.net
Page 8