21
COMPONENTS DIAGRAM
Fig.1 Fig.2 Fig.3
N
M
E
F
B
D
I
A
J
H
C
G
L
K
O
22
GENERAL DESCRIPTION
A. Food
pusher
B. Feeding
tube
C. Cover
D. Rotating
filter
E. Juice
collector
F. 1,3 L pulp container
G. Juice
exit
H. Motor
axle
I. Main
body
J. Security
looks
(2x)
K. Operation
button
L. Feet with suction cups
M. Jug’s
lid
N. 0,6 L juice jug
O. Brush
TECHNICAL SPECIFICATIONS
Supply voltage: 230V~ 50Hz
Power: 500W
PREPARING FOR USE
With the Electric Co Juice Extractor MSB500 you can prepare delicious fresh juices quickly.
Before the first use
-
Make sure that all the packaging materials have been properly removed before using the
appliance.
-
Wash all the detachable parts of the appliance (A, C, D, E, F, M, N and O) by hand with
warm water and a mild detergent, except the main body (I) and dry them thoroughly before
fitting them back into the appliance.
Note: take special care when handling the filter (D) since it contains sharp blades.
-
Assemble the appliance, fitting all its parts properly – see section “Assembling”.
Assembling
-
Place the appliance on a non-slippery surface with the operation button (K) facing you.
Note: make sure that the appliance is disconnected from the wall socket before proceeding
with its assembling.
-
Place the juice collector (E) on the main body (I) and fit the filter (D) on to the motor axle
(H) by pressing it slightly until fitted (Fig. 1).
-
Insert the pulp container (F) on the left side of the appliance and the juice jug (N) on the
right side, making sure that the opening of lid (M) stays under the juice exit (G) (Fig. 2).
-
Put the cover (C) on top of the appliance and clamp it rotating the security locks (J),
located on both sides of the main body (I), to position “
” (closed) (Fig. 3).
