www.LibertyTrike.com | [email protected] | 1-866-894-4620
[6]
ASSEMBLY
THE HANDLEBAR, SADDLE,
BASKET, AND CABLES
STEP 1: SEATPOST AND HANDLEBAR INSTALL
NOTE: Always insert the handlebar/stem and
seatpost past the minimum insertion mark,
in order to prevent damage and failure.
• Insert the seatpost and handlebar/stem to your
desired height and make sure it’s straight.
(See photo 1.1)
STEP 2: CLOSE THE QUICK-RELEASE LEVERS
NOTE: Do not exceed max torque, check torque
list on page 13.
• Close quick-release levers and make sure that
the stem and seatpost doesn't spin.
(See photo 1.2)
• If the stem or seatpost does spin, you need
to tighten the nut on the clamp slightly.
STEP 3: INSTALL THE BASKET
NOTE: Never lift the Liberty Trike by the basket.
• Line up and tighten the thumbscrews.
(See photo 1.3)
STEP 4: CONNECT THE CABLES
NOTE: Carefully align the pins, when connecting
the cables.
• Plug in the battery cable.
• Plug in the single 9-pin accessory cable.
(See photo 1.4)
Photo 1.1
Photo 1.2
Photo 1.3
Photo 1.4
