reach, you may use an extension cord rated for a minimum of 1875
Watts.
Operation
Three switches provide a choice of heat settings. A switch is in the ON
position when the side with the markings on (i.e. I, II, or II) is pushed in.
(Figure 2)
!
5
Figure 2
3
2
1
Switch 1
(I)
Manual mode
Controls the electricity supply to the heater and flame
manually.
(II)
Remote mode
Allows the control of electricity supply to the heater and
flame through the use of the supplied remote control.
NOTE:
This switch must be in either (I) or (II) to operate
with or without heat.
Switch 2
(I) Provides 715 Watt heat output.
Switch 3
(II) Provides 1430 Watt heat output with Switch 2.
Remote Operation
The fireplace is supplied with an integral ON/OFF remote control.
NOTE:
Ensure that the fireplace ON/OFF Switch is set to the
remote control setting (I.E.. II).
!
