Electra Universale, Руководство пользователя и инструкция по установке

Страница: 9 / 12

Universale Quick User Guide Rev.1.10 ENG Delectrais an Elettrolab Group brand
9
7.2 FUNCTION menu
The FUNTION menu allows to change and customize some functional settings of
Universale
, e.g. DMX channels, output
PWM frequency, ecc… For more details please refer to the schematic below:
FUNC
DIMM EFF
XENO /
HALO
It allows to simulate a dimming effect like a Xenon or Tungsten lamp.
CUR QUAD / LIN
It allows to select dimming curve between quadratic and linear.
DISP ON / OFF
It allows to enable/disable the screen saver.
FRE 320  1200
It allows to select the PWM frequency from 320Hz and 1200Hz (10Hz steps).
FAN
SILE
It allows to set the fans rotation at the minimum speed (silent).
ON
It allows to set the fans speed in according to the temperature detected on the LED or on the
device heatsink.
CAL
MIN 0

9999
It allows to calibrate the minimum level of the outputs.
MAX 200

255
It allows to calibrate the maximum level of the outputs.
DFSE SURE
It allows to restore the device to the factory settings. For default parameters refer to the
schematic below:
Parameter Default setting
Dimmer Effect XENON
Dimmer Curve QUADRATIC
Screen Saver OFF
Frequency 320Hz
Fans Speed SILENT
DMX Channels 2 CHANNELS
ID Code 0
Phase Dimming ON
REM
1

250
It allows to select the ID number to made a connection between the device and the “Remoto”
accessory.
CHAN
1CH
2CH
It allows to select the number of DMX channels (see DMX charts - chapters 6.1, 6.2 and 6.3 ).
3CH
U.DIM
ON / OFF
It allows to enable/disable the phase dimming control.