Electra Monoblock 7, Руководство по обслуживанию

Страница: 182 / 187

English 23
Figure 25. Units joined for moving - Model 3.1 KW (R407C) only
1. Indoor Unit
2. Outdoor Unit
Figure 23. Removal of condensate basin
Model 3.1 KW (R407C)
Figure 24. Removal of condensate basin
Model 4.1 KW (R22/R410A)
3.1 KW (R410A)
MOVING AND STORING - ALL MODELS
(See Figure 25)
Before carrying or storing, tilt the outdoor unit to empty it from any remaining condensed water, Use the carrying
handles to move the unit on its castors.
Do not attempt to move the unit by pulling the flexible hose. When transporting the appliance in a vehicle, always
kept it in an upright position.
FOR MODELS 3.1 KW (R407C) ONLY
The indoor and outdoor units should be joined together (Figure 25) when moving or storing the air conditioner. To
join the units, insert attaching pins (10) of the outdoor unit into the key holes (2) of the indoor unit (see Figure 3).
AT THE BEGINNING OF THE SEASON
Make sure there are no obstacles blocking the flow of inlet or outlet air.
Make sure the power supply is properly connected.
CLEANING OUTDOOR UNIT CONDENSATE BASIN (See Figures 23 and 24)
Remove the water basin (2) by unscrewing the four screws (3) on each side of the basin. Clean the basin with
water, dry and reinstall.