Electra Monoblock 7, Руководство по обслуживанию

Страница: 177 / 187

13
9-10
1
6
13
8
English 18
CURRENT CLOCK TIME SET
Clock setting is performed when batteries are inserted.
The remote control displays the setting, and the clock
display will blink "00:00" or "12:00" until a new time is
set. For clock setting, use buttons (9) (10) in order to
set the hours and minutes, respectively, and then
press timer SET button (13). The clock setting can
also be performed by pressing the timer SET button
(13) for 5 seconds. The clock display will blink; for a
new setting, follow the steps described above.
TURNING OFF THE AIR CONDITIONER
Press START/STOP button (1) to turn OFF the air
conditioner. Operation Indicator (B) on the air
conditioner will be turned off. The remote control LCD
will display the clock time and room temperature or the
set-point temperature. The last operating set-up will be
kept for the next operation.
SLEEP FUNCTION
Press SLEEP button (6) to select the SLEEP function.
When the sleep function is activated, the air
conditioner will be automatically turned OFF after
seven hours. If at the same time TIMER OFF is
activated as well, the air conditioner will be turned OFF
according to the TIMER settings. TIMER indicator (A)
on the air conditioner lights up during SLEEP function.
To cancel SLEEP function press one of the following:
START/STOP button (1)
SLEEP button (6)
TIMER OPERATION
Press the TIMER select button (8) to activate the timer
operation mode. Each time the TIMER button (8) is
pressed, one of the four types of operation modes
(shown below) will appear on the LCD display. The
operation modes are sequenced in the direction of
arrow. Indicator (A) on the air conditioner will light up
during TIMER operation.
NOTE: After a power failure, the TIMER indicator (A)
will blink. When the unit is in TIMER mode, the unit
will a tomatically change to STAND BY mode and the
timer operation will be cancelled. To resume the timer
operation, follow the instructions, above.
u