page 3/6
2 MOunTing The cOMpOnenTs Of The insTallaTiOn
2.1 Outdoor panel
Name/Address
Module
Print the label using:
Print Label ELT
www.electra.ro
Sticker
Fastening clips
Before beginning ...
The outdoor panel
is
mounted at the entrance
to the property, on the
body that is closest to the
pedestrian access gate.
A. Flush mounting
Main cable
Lock cable
Cable fastening
and guiding piece
Special screw with wrench
1
2
3
-5 cm
≈17 cm
cable length
Align the edges
of the shell to
the surface of the
wall.
No inset/offset!
B. Surface mounting
1
2
3
TORKS Screw
B4,2 × 60 Screw
(4 pcs.)
Main cable
Lock cable
Cable fastening and
guiding piece
≈17 cm
cable length
(from the wall)
2.2 power connection box (similar)
A. DIN bar mounting
B. Surface mounting
Fastening clip
DIN bar
1
2
3
A3,5 × 32 Screw
(2 pcs.)
B2,9 × 9,5 Screw
(4 pcs.)
Protection lid
(2 pcs.)
2.3 indoor terminal
Before beginning ...
The indoor terminal
is mounted at the
location and height
discussed with the owner
(140 cm recommended height).
A3,5 × 35(32) Screw
(4 pcs.)
Cable fastening
and guiding
pieces
1
2
≈18 cm
cable length
(from the wall)
