Elecrow GrowCube, Руководство пользователя

Страница: 46 / 50

The device detects motor
blockage more than 3 times,
which results in device locked
The device detects the motor
idling more than 3 times,
which results in device locked
The device detects an
abnormality of a certain sensor
more than 3 times, which
results in water outlet locked
The device detected an
abnormal situation
The water outlet of the device is blocked or the water
pipe is blocked
1. Unplug the water pipe and check whether the water
can flow through, if not, clean the water outlet with a
fine needle
2. Check whether the water pipe is squeezed by heavy
objects and whether the water outlet of the water pipe
is blocked by sludge.
After the troubleshooting, press the unlock button on
the side of GrowCube to resume normal use
The water outlet of the water tank (the water inlet of
the motor) is blocked or the water tank is empty
1. Check whether the water tank is empty
2. If there is no shortage of water, unplug the filter head
of the water inlet to check whether it is blocked. If it is
blocked, clean it with a fine needle.
After the troubleshooting, press the unlock button on
the side of GrowCube to resume normal use
Connect the app, you can determine which sensor is
abnormal through the pop-up window.
After the troubleshooting, press the unlock button on
the side of GrowCube to restore the locked water
outlet to normal use
Troubleshoot the following exceptions:
1. There is a sensor not connected in the planting plant
2. There are abnormal sensor data of plant being
measured
3. The equipment is short of water or the water inlet is
blocked
4. The water outlet of the equipment is blocked or the
water pipe is blocked"
Phenomenon Problem Solution
Quick flashing Red
Slow flashing Red
Solid Red
The device beeps
Chapter 6
Troubleshooting
44