![background image](http://html1.mh-extra.com/html/elecro-engineering/spectrum-hybrid-sh-110/spectrum-hybrid-sh-110_installation-and-operating-manual_2378740012.webp)
www.elecro.co.uk
Flow Requirements
Minimum flow rate:
55W (single tube) and 110W (double tube) = 4m3/hour
(4,000 litres per hour)
Maximum flow rate:
55W (single tube) = 12m3/hour (12,000 litres per hour)
110W (double tube) = 24m3/hour (24,000 litres per hour)
Your Spectrum Hybrid is factory set to accept input water flow entering on
the left and exiting on the right, this can be reversed by rotating the flow
switch 180 degrees (i.e ½ turn - see fig. 8)
WARNING! The flow switch paddle can be damaged when reversing the flow
direction if it is lifted by more than 5mm from its housing and turned with
force. If the flow switch has been rotated it is important to ensure that it is
finally locked in the correct orientation perpendicular (at right angles) to the
flow of water.
Electrical connection
The unit must be installed in accordance with the country / regional
requirements and regulations. Always disconnect all pool appliances from
the mains electricity supply before servicing. In any event the work must
ENGL
IS
H
10
Flow
Optional
reverse flow
Factory set
flow
Fig 8.
To reverse flow: Loosen retaining
nut (A) and rotate flow switch by
180 degrees as shown (B). Always
ensure the arrow marked on the
plastic flow switch body is in the
same direction as the water flow
B
A
Содержание Spectrum Hybrid SH-110
Страница 1: ...Spectrum Hybrid UV Hydroxyl Radical Pool Sanitiser Installation Operating Manual...
Страница 2: ...ENGLISH www elecro co uk...
Страница 9: ...2 www elecro co uk ENGLISH RAW PLUG x 5 WASHER x 5 SCREW x 5 Fig 6 7 110W Double Tube Unit...
Страница 14: ...www elecro co uk ENGLISH 12 Fig 9 LAMP LIFE INDICATOR RESET SWITCH...