Elecro Engineering HR-110, Инструкция по установке и эксплуатации

Страница: 12 / 32

www.elecro.co.uk
1
ENGL
IS
H
11
be carried out by a qualified electrician, who will provide a certificate of
conformity upon completion of the work.
The power supply must be fitted with a RCD with a rated residual
operating current not exceeding 30mA. This unit must be installed inside a
dry, weatherproof enclosure.
The unit is fitted with 5 metres of power cable. To prevent the unit
inadvertently being dropped into the pool it must be securely positioned
at least 3.5 metres from the edge of the pool.
Lamp Life Indicator Model (Analogue)
Under normal conditions the UV lamp(s) inside the unit have a usable life
of 9,000 hours. The unit is fitted with a ‘Lamp Life Indicator’ LED in order to
remind you to change the lamp(s) after this set period of time.
At initial ‘Power On’ of the H.R.UV-C the LED indicator will light in Red
colour for one second to indicate that the time setting is 9,000 hours, and
immediately change colour to Green to indicate that the timer has started.
When the timer reaches <500 hours the LED indicator will change colour
from Green to Amber to indicate that the UV lamp(s) is getting near to
its end of life; when the timer reaches zero the LED indicator will change
colour from Amber to Red, flashing slowly to signal that the UV lamp(s)
should be changed.
After changing the UV lamp(s) the timer is reset by pressing and holding
the reset button until the LED indicator goes ‘Off’ and then comes back
‘On.’ When the reset button is released the LED indicator will come back
‘On’ (Red colour for one second followed by Green colour), this indicates
that the timer has restarted and is reset to count down the subsequent
9,000 hours.