Elecfreaks Arduino Starter Kit, Руководство пользователя

Страница: 2 / 8

Part1. Arduino Start blink
/*
PART1 ARDUINO START Blink
Turns on LED for one second, then off for one second, repeatedly.
Get the code from: Arduino IDE‐>File‐>Example‐>Basics‐>Blink
Pin 13 has an LED connected on most Arduino boards.
*/
int led = 13 ;
// the setup routine runs once when you press reset:
void setup () {
// initialize the digital pin as an output.
pinMode ( led , OUTPUT ) ;
}
// the loop routine runs over and over again forever:
void loop () {
digitalWrite ( led , HIGH ) ; // turn the LED on (HIGH is the voltage level)
delay ( 1000 ) ; // wait for a second
digitalWrite ( led , LOW ) ; // turn the LED off by making the voltage LOW
delay ( 1000 ) ; // wait for a second
}
Part2. Button control LED
/*
PART2 BUTTON CONTROL LED