46
SC iStick Power – Error Messages & Protections
1� If you hold the On/Off button for longer than 10 seconds, the device switches itself off for safety reasons�
This is indicated by “Over 10s” on the corresponding display�
2� If a short circuit in connection with the clearomizer the device will display “Atomizer Short” and turn
off automatically� In this case, use another clearomizer head or make sure the existing head is properly
installed in the clearomizer�
3� If no clearomizer is present, “No Atomizer” appears on the display�
4� If the actual temperature of the coil is higher than the target temperature in TC-Ni/TC-Ti/TC-SS/TCR
(M1,M2,M3) modes, the display shows “Temp Protection”�