◆ 600 series supply more than 256 channels for your choice, please
600 series remote controllers have been set corresponding ID code.
12
11
Both the transmitter and the receiver, there have a 8 dial-up switch (see
photo), if this address is changed ,the working frequency of the transmitter and the
reciver will also be changed.
Note:
◆ Finishing the setting of dial-up swich, please cut off the power, and then it
will be effective after electricity.
choose the allowed channel to operate, we promise most channels is available
and reliable, but not sure every channel, if you find wrong channel, please trip
off to use.
★ How to set the frequency of the transmitter
controlled machine. User can meet the instructions controlled by corresponding
indicator to the relay
Note: please shut off the receiver power first and change the port, then it is
valid to open the receiver.
Every unit controller have the unique code. For specific needs, we allow to amend
ID code. For the special customers, they can match the emitters and the receivers
by themselves according to specific operation procedure.
★ How to match ID code
