Eldom RAPID BLADE MT500, Инструкция по эксплуатации

Страница: 14 / 52

14 EN
-
(4)
is in full contact with the skin (
Fig. 8
).
- Figure 9 shows how to remove the comb
(4)
.
-
Tips
- Replace the blade when trimming performance and comfort are reduced, but at least
once a year.
- The best results can be obtained when the skin and hair are clean and dry.
CLEANING AND MAINTENANCE
-
the device by pressing button
(2)
. The unit must be disconnected from the power supply.
- Clean the trimmer after each use.
- Do not use strong or cleaning agents or cleaning products which can damage the surface.
- Remove the comb (
Fig. 9
).
- Brush away any accumulated hairs.
-
Fig. 10
).
- Rinse the comb with lukewarm water.
-
- Never dry the blade with a towel or a tissue, as this can cause damage.
- All parts of the unit must be dry before subsequent use.
Note: The blade edges are sharp, so use caution when handling this product.
If damage is found, the blade must be replaced immediately.
Replacing the blade
Note: The blade edges are sharp, so use caution when handling this product.
The blade can only be replaced with the original .
- Press the button
(2)
- Carefully push the blade-release switch upwards, while gripping the blade on both sides
(
Fig. 11
).
- Hold the new blade by both its sides, slide into the body of the device, and press it in
place (
Fig.12
).