Eldom CS7K, Руководство по эксплуатации

Страница: 7 / 23

OPERATING INSTRUCTION
CORDLESS KETTLE
CS7K
General description
TECHNICAL DATA
1. Spout + net filter
2. Lid release button
3. Opening lid
4. On/off control lamp
5. Handle
6. Water level indicator
7. Rotating base
- power: 2000W
- mains voltage: 230V ~ 50Hz
- 1.7 litre capacity
- mains protection: 10 A
- protection insulation class I
HOW TO USE THE APPLIANCE
Cordless kettle CS7K is for boiling water.
It is possible to boil 0.7 – 1.7 litre of water in the kettle.
The kettle base (7) must be put on a flat and dry surface.
In the base there is some space for an excess cord. It is important for the cord to be led from
the base (7) through a special groove so that the appliance could be stable.
Before using the kettle for the first time fill it up (2-3 times) with water, boil the water and then
empty the kettle.
The kettle can be filled with water directly through the spout (1) or after opening the lid (3).
In order to open the lid (3) you must press the button (2).
The kettle must not be filled up when on the base.
The kettle starts working after putting the switch (4).
The kettle working is signalled by the control lamp (4).
The kettle switches off automatically after the water has boiled.
You can stop heating water at any time by putting the switch (4).
5
2
3
1
4
6
7
- the appliance is made of materials which can be recycled,
- it should be handed over to the applicable collection point for the recycling
of electrical and electronic equipment
ENVIRONMENTAL PROTECTION
WARRANTY
- this appliance is designed for domestic use only,
- it cannot be used for professional purposes or for other than the intended use,
- improper use will nullify the guarantee. Warranty details in the appendix
7