WARNING!
Failure to comply with requirements for fixing the water heater to the wall may
cause damage to the appliance or to other appliances in the premise where it is located, to
corrosion or even more severe damages and harms. In such cases eventual damages and
harms shall not be covered by the manufacturer or seller warranty liabilities and shall be at the
expense of those violating these instructions.
Only qualified workers shall be allowed to mount the water heater on the wall.
MOUNTING THE OUTDOOR UNIT
RECOMMENDATIONS:
Use only the fittings supplied in the delivery set and placed in the
package for the external unit wall mounting stand and the supplied corrugated drainage pipe.
CAUTION!
Before starting installation be sure that the place selected fulfills the following
requirements:
а
) Find the most suitable position with enough space on the wall in order to make easier the
installation and maintenance of the outdoor unit (Fig. 1);
b) The outdoor unit is installed on support or curtain wall with built support structure. The place
must be safe in any respect and noise and cold air must not cause any problems. For mounting
the unit use fastening brackets. The place must not allow passage near the outdoor unit and
must ease discharge of condensation water;
c) The outdoor unit must be installed completely horizontal. (Fig. 1);
d) Provide space for connection of pipes and power cables, as well as an opening in the wall
where these shall pass through;
e) Mount the unit securely on the wall with suitable screws or anchors (pay attention for hidden
cables and pipes). Secure the location against vibrations.
f) Condensation or water appearing during outdoor unit operation must be removed and offset
through drainage. A nipple or flexible sleeve may be installed in order to secure free flow of
water (Fig. 3).
Fig.3
6
