Version 23.05.2013
C1-C20
Pa
ge
8
3.3.3.
After-market rear-view camera
Connect the video RCA of the after-market rear-view camera to female
RCA connector R-CAM IN of Interface-box C1C-M01.
Connect the green wire of the 4pin cable to the camera power supply (+12V max. 1A)
of the after-market rear-view camera and the grey wire to ground of the vehicle. The
green wire is high (+12V max. 1A) when reverse gear is engaged. The white wire is
not connected and has to be isolated. In some cases it is possible that the automatic
switching does not work. In this case connect the white wire to the reverse gear light
(+12V).
Note:
Automatic switching to camera only works from c.LOGiC mode.
4.
Operation
4.1.
Activation of the video-in-motion function
The video of the c.LOGiC is displayed also in motion.
Note:
On vehicles with previously installed factory TV-tuner an extra video-in-motion
interface might be necessary. It is not possible to determine this prior to testing.
4.2.
Selecting the c.LOGiC as current AV-source
Push
TV
button of Comand to choose the c.LOGiC as current AV-source.
www.eldibg.com
car audio & multimedia system
