Introduction
GSM Axcess 2 and 3 requires a GSM subscription with caller ID.
This is only a Quick guide. Complete documentation and PC software can be down-
loaded from
https://eldesalarms.com/product/configuration-tool/
Start Up
1. Place the SIM card in the holder with the PIN turned of. The PIN can be
turned off in a cell phone.
2. Connect control to a relay, for example, gate opening. ESIM 110 has one
relay; ESIM has two relays.
3. Connect and mount it where the cell reception is best, away from metal and
other obstructions.
4. Supply voltage, 10-24 V AC/DC.
5. GSM Axcess will start up after about one minute. Start up is indicated by
flashing of the NETW LED.
Configuration of GSM Axcess using the
PC software
Older units may have fewer settings in the software
1. Connect the GSM Axcess to a computer using the supplied USB cable.
2. Start
Eldes ConfigTool
, which can be downloaded from
https://eldesalarms.com/product/configuration-tool/
.
3. Click on
Connect and enter the password. The default password is
0000
.
4. Select the
Main Settings tab.
5. Enter at least on administrator number, the phone number should be
entered with the country code, 46 for Sweden, and without the initial zero.
3 (7)
Quick guide GSM Axcess 2/3
