Eldes EWKB5, Руководство по установке

Страница: 7 / 36

7 EN ELDES WIRELESS TOUCHPAD EWKB5
4. BATTERY
EWKB5 does NOT feature a built-in battery charging unit, therefore only
1,5V Lithium AA type (non-rechargeable) batteries can be used. The
batteries are used only in case of a main power failure!
BATTERY REPLACEMENT
1. Activate Service mode by accessing the settings menu (Master code required) or
using alternative methods, such as SMS text message.
2. Open EWKB5 enclosure.
3. Remove the old batteries from the battery slots.
4. Insert the new batteries based on the battery slot positive/negative terminals
indicated on the battery slots of EWKB5.
+
+
+
+
+
+
-
-
-
-
-
-
• Only 1,5V Lithium AA type FR6 (IEC) / 15LF (ANSI/NEDA) batteries can
be used. Install only new, high quality and unexpired batteries. Do not
mix the old batteries with the new ones.
• All batteries must be removed if the device is not in use.
• In order to avoid fire or explosion hazards, the system must be used only
with approved battery. Special care must be taken when connecting
positive and negative battery terminals. Dispose old batteries only into
special collection sites. Do not charge, disassemble, heat or incinerate
old batteries.
• The battery status can be monitored in real-time on EWKB5 screen or
by using ELDES configuration software.
• The system sends an SMS text message to the listed user phone
number as soon as the battery level runs below 5%.